Jumper Cable EC5 Connector Alligator Clamp Booster Battery for Car Jump Starters

Description

Strong Alligator Clamp Clip with EC5 Plug Connector (Fit for most car jump portable starters)
Operating temperature: 0°C - 60°C
Support up to: 20000mAh Power bank at 600Amp current . (<3 seconds)
Wire Gauge: 10 AWG - Strong Alligator Clamp Clip with EC5 Plug Connector (Fit for most car jump portable starters)
Total Length: about 13"
How to use:
1. Connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative pole.
2. Plug the cord of jumper cable into the jumper starter's socket.
3. Start the vehicle.
Cautions:
1. Do not reverse the operation sequence of the jump starter.
2. Do not get black clamp and the red one touched each other when being connected with your emergency jump starter power bank.
3. Do not use jump starter to start vehicle if the number of battery indicators are less than 3 to protect the jump starter from damage.
4. C
able must be removed from the vehicle's battery within 30 seconds after the vehicle started to prevent overheating.