Diving board mount kit: compare to 67-209-911-SS, white, 4-1/2" bolts, 2"OD f/w

Description

Standard diving board mounting hardware kit for 6 and 8 ft. diving boards accommodates many board and base combinations.
Equivalent to S.R. Smith p/n 67-209-911-SS.
All stainless steel hardware required for safe installation of most 2-bolt mounted diving boards including:
2) special plastic domed safety washers
2) 1/2" x 4-1/2" s/s carriage bolts
2) 1/2" x 2" x 1/8" extra thick s/s flat washers
2) 1/2" s/s lock washers
2) 1/2" s/s nuts
4) 1/2" x 2" x 1/16" rubber seal washers
2) white caps for nuts on bottom
Anti-seize compound pre-applied to bolt threads to prevent galling or seizing between bolt/ nut assembly.
Other kits available with different flat washer outside diameters (1-1/4") and different carriage bolt lengths (
3", 5", 5-1/2", and 6"
).
This kit recommended for salt water pools because it uses the plastic domed safety washer.
This mounting kit typically used for Flyte-Deck I diving board stands.
Please check my other listings or contact me for more info.