Car EC5 Plug Booster Cable Alligator Clip Connector Battery Jumper Starter Yd

Description

Car EC5 Plug Booster Cable Alligator Clamp Clip Connector Battery Jumper Jump Starter
Condition:
100% new
Color:
Red & Black
Material:
metal & plastic
Length:
approx.32cm(12.6inch)
Rated Voltage:
30V
Rated Current:
160A
Reverse Voltage:
30V(the voltage is less than 20V when the car is starting or the clamps are connected)
Wire:
10 AWG Silicone Wire
Plug:
EC5 Plastic Shell
Item included:
1 x Booster Cable
Compatible With:
Fit for all car
This Is Aftermarket Replacement Item But Not Genuine
Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
3) Keep this appliance away from children.
4) Do not reverse the operation sequence of the jump starter.
5) Do not use jump starter to start vehicle if the number of battery indicators are less than 3 to protect the jump starter from damage.
6) Do remove the product from the vehicle within 30 seconds after the vehicle started,or it may cause security incidents.
7) Do not connect and/or attach two clamps together, it may cause danger
Product Dimension:
Feature:
1) 100% brand new and good quality.
2) This booster cable with clamps is a strong alligator clamp clip with EC5 Plug connector.
3) Designed with prevent reverse charge module, it is very safe and convenient.
4) It works with car jump starter, and fits for most car jump portable starters.
5) It is easy to install and use. Just plug and play.
6) It is the perfect replacement or spare set of cables.
7)Red clamp connect to the positive(+) battery terminal, black clamp connect to the negative(-) battery terminal.
Using Method:
1. Connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the (-) negative pole.
2. Plug the cord of jumper cable into the jumper starter's socket.
3. Start the vehicle